I wanted to start a blog for my Karman Ghia restore project and animation progress reel.
Day one of i plasma cut out the rusted left and right pan halfs. I will be replacing both pan halfs
because of rust. I had to use a air hammer after plasma cutting both halfs out to remove the spot welds. After finshing cutting them out i needed to used a grinder to remove the spot welds heads to make a flat resurface for TIG welding the seems back.
Before grinding the welds video 1,
After grinding the welds video 2,
ok heres a comment for you so you can see I was here :-)
ReplyDelete